50% dutyクロックパルスから直流バイアス正弦波電流を生成する方法とそのフラックスゲート励磁への応用
50% dutyクロックパルスから直流バイアス正弦波電流を生成する方法とそのフラックスゲート励磁への応用
カテゴリ: 研究会(論文単位)
論文No: MAG22033
グループ名: 【A】基礎・材料・共通部門 マグネティックス研究会
発行日: 2022/02/14
タイトル(英語): A method for producing dc-biased sinusoidal current from a 50% duty clock pulse and its application to the fluxgate magnetometer excitation
著者名: 笹田 一郎(笹田磁気計測研究所株式会社)
著者名(英語): ichiro sasada(sasada magnetics and sensors laboratory)
キーワード: 直流バイアス正弦波電流|クロックパルス|LC共振|スイッチングトランジスタ|磁気センサ励磁|dc-biased sinusoidal current|clock pulse|LC resonance|switching transistor|fluxgate excitation
要約(日本語): 同期検波方式は高性能センサを構成する上で重要な技術の1つである.2相パルスの1つは同期検波回路の同期パルスとして用いることができるので,他のパルスから容易に励磁電流を生成できる回路があればアナログ移相回路を用いること無くセンサの回路を簡潔にまとめることができる.本稿では50%dutyのクロックパルスから直流バイアス正弦波電流を生成する回路を報告する.スイッチングトランジスタ,2つのインダクタと1つの共振用コンデンサを用いるが,パラメータ調整によって直流電源から供給される電流にスイッチングの高調波を最小化することができる.これによって基板の上のセンシティブな回路要素に及ぼす電磁干渉を最小化できる.
要約(英語): Phase-sensitive-detection is a basic technique to make a high sensitivity magnetic sensor. dc-biased ac excitation current is used in the fundamental mode orthogonal fluxgate magnetometer. Therefore a method to produce such a current from one of two-phase clock pulses is important to build a sensor, on the other hand the other clock pulse is used to control a phase-sensitive-detector. In this report, a circuit is designed by using two inductors and a resonant capacitor. Switching harmonics included in the current drawn from a dc-source can be minimized by properly adjusting inductor values. As an application of the circuit, a fundamental mode orthogonal fluxgate magnetometer is presented.
本誌掲載ページ: 27-31 p
原稿種別: 日本語
PDFファイルサイズ: 1,574 Kバイト
受取状況を読み込めませんでした
