曲げ応力下を想定したFe-Ni系3層薄帯の磁気特性 - 計算機解析 -
曲げ応力下を想定したFe-Ni系3層薄帯の磁気特性 - 計算機解析 -
カテゴリ: 研究会(論文単位)
論文No: MAG23093
グループ名: 【A】基礎・材料・共通部門 マグネティックス研究会
発行日: 2023/11/21
タイトル(英語): Magnetic properties of Fe-Ni triple-layer ribbons under bending stress - Computer simulation -
著者名: 中島 駿輔(長崎大学),廣瀬 亮太(長崎大学),山口 優花(長崎大学),柳井 武志(長崎大学),山下 昂洋(長崎大学),中野 正基(長崎大学),福永 博俊(長崎大学)
著者名(英語): Shunsuke Nakashima(Nagasaki University),Ryota Hirose(Nagasaki University Graduate School),Yamaguchi Yuka(Nagasaki University),Takeshi Yanai(Nagasaki University),Akihiro Yamashita(Nagasaki University),Masaki Nakano(Nagasaki University),Hirotoshi Fukunaga(Nagasaki University)
キーワード: 軟磁気薄帯|計算機解析|磁気特性|応力|Soft magnetic ribbons|Computer analysis|Magnetic Properties|Stress
要約(日本語): 最近、我々は曲げ応力を利用してFe-Ni系二層リボンの高周波特性を改善する方法を報告し、外部応力下における二層リボンの磁気特性のシミュレーション手法を開発した。本研究では、磁気異方性を持つリボンの生産性を向上させるため、正、ゼロ、負の磁歪を持つ3つの磁性相(それぞれP相、Z相、N相と表記)からなる3層Fe-Niリボンの曲げ応力下での磁気特性のシミュレーションを行った。中間層として採用したZ相の厚みを増すと、保磁力が増加した。Z相は曲げ応力により一軸異方性が誘起されるため、Z相の量が多いと低保磁力化に不向きであった。シミュレーションの結果、Z相の厚さがリボンの厚さの約10%以下の場合、リボンは低い保磁力を示した。薄いZ相の採用は誘導磁気異方性を劣化させなかったことから、3層Fe-Niリボンは高周波用途の候補であると結論付けた。
要約(英語): Recently, we reported a method to improve the high-frequency properties of Fe-Ni-based bilayer ribbons by using bending stress, and a simulation method for the magnetic properties of the bilayer ribbons under external stress was developed. In the present study, we simulated the magnetic properties under bending stress for triple-layered Fe-Ni ribbons, which consist of three magnetic phases with positive, zero, and negative magnetostriction (described as P-phase, Z-phase, and N-phase, respectively), to improve the productivity of the ribbons with magnetic anisotropy. With increasing the thickness of the Z-phase employed as an intermediate layer, the coercivity increased. Since a uniaxial anisotropy could be induced for the Z-phase by the bending stress, a large amount of the Z-phase was unsuitable for low coercivity. In our simulation results, when the thickness of the Z-phase was less than approximately 10% of the ribbon thickness, the ribbon showed low coercivity. As the employment of thin Z-phase did not degrade the induced magnetic anisotropy, we concluded that the triple-layered Fe-Ni ribbons are a candidate for high-frequency applications.
本誌掲載ページ: 7-10 p
原稿種別: 日本語
PDFファイルサイズ: 1,056 Kバイト
受取状況を読み込めませんでした
