カスコード型CMOSインバータを用いた全差動OTAの設計と評価
カスコード型CMOSインバータを用いた全差動OTAの設計と評価
カテゴリ: 研究会(論文単位)
論文No: ECT10033
グループ名: 【C】電子・情報・システム部門 電子回路研究会
発行日: 2010/03/25
タイトル(英語): Design and Evaluation of Fully Differential OTA Using Cascoded CMOS Inverters
著者名: 矢澤 和樹(北見工業大学),谷本 洋(北見工業大学),原口 大(㈱ルネサステクノロジ)
著者名(英語): Yazawa Kazuki(Kitami Institute of Technology),Tanimoto Hiroshi(Kitami Institute of Technology),Haraguchi Masaru(Renesas Technology Corp.)
キーワード: カスコード型CMOSインバータ|全差動OTA|同相除去回路|高電圧利得|低電圧動作|Cascoded CMOS Inverter|Differential OTA|Common-mode Rejection|High Voltage Gain|Low Voltage Supply
要約(日本語): デバイスの微細化に伴いCMOSプロセスの固有利得が低下している.高い電圧利得の全差動OTAを実現するためCMOSインバータ2段構成とし,さらに初段をカスコード構成とする事を提案した.これを低電圧で動作させるべくバックゲートにバイアスを加えVthを低減した.同相信号を打ち消すため,カスコードインバータのMOSを並列に設けた.試作評価の結果,1V動作で差動利得59dB,同相除去比80.9dBが得られた.
要約(英語): A new low voltage operating fully differential CMOS OTA construction, which uses dual-input cascoded CMOS inverters, is proposed. The OTA is a two-stage configuration with dual-input cascoded CMOS inverters at the input stage, and traditional CMOS inverters in the output stage, with a common-mode feedback path form the output terminals to one of the input terminals of cascoded CMOS inverters. The OTA has been designed and fabricated in a 0.15 μm triple-well CMOS process, in order to effectivelyreduce its threshould voltages by the bulk bias technique. The OTA successfully operated from 1 V power supply, with 59 dB of differential voltage gain, 80.9 dB of CMRR and 25 MHz of unity gain frequency, at 60 μA of current consumption.
原稿種別: 日本語
PDFファイルサイズ: 848 Kバイト
受取状況を読み込めませんでした
