CMOSアクティブインダクタ発振回路の周波数切り換え工程の線形化
CMOSアクティブインダクタ発振回路の周波数切り換え工程の線形化
カテゴリ: 研究会(論文単位)
論文No: ECT11032
グループ名: 【C】電子・情報・システム部門 電子回路研究会
発行日: 2011/03/24
タイトル(英語): Linearization of frequency switching process of a CMOS active inductor oscillation circuit
著者名: 吉長 雅司(広島工業大学),田中 航介(広島工業大学),山田 明宏(A.LSIデザイン),田中 武(広島工業大学)
著者名(英語): masashi yoshinaga(Hiroshima Institute of Technolgy),kousuke tanaka(Hiroshima Institute of Technolgy),Akihiro Yamada(A.LSI design company),Takeshi Tanaka(Hiroshima Institute of Technolgy)
キーワード: LCタンク回路|広帯域|狭帯域|第1変調|第2変調|デジタルコード|LC tank circuit||wide bandwidth|narrow bandwidth|the first modulation|The second modulation|digital code
要約(日本語): この論文は、CMOS 0.6(um) デジタル標準プロセスを使用した広帯域CNOSアクティブインダクタ発振回路のアーキテクチュアと3つのモードを持つ発振周波数帯域チューニング回路の検討である、この発振器の周波数チューニング回路は、LCタンクアレイ回路とスイッチトキャパシタ回路を使用した回路である。狭帯域周波数変調(第1変調)は、容量制御電圧で行い、中心周波数ごと30MHz~120MHZの線形周波数特性を持つ狭帯域サブバンド周波数帯で実施した。また広帯域周波数チューニング(第2変調)は、デジタルコードとフローティングMOS可変抵抗回路を使用して行った。
要約(英語): This paper presents architecture of a wideband CMOS active inductor oscillation circuit using a digital CMOS 0.6um standard process. It was also examined about an oscillation bandwidth tuning circuit with three modes. The frequency tuning circuit has the LC tank array circuit and the switched-capacitor circuit. The narrow-band frequency modulation (the first modulation) was modulated by a capacitor control voltage and a modulation was performed in a narrow-sub-band frequency which had a linear frequency characteristic of 30MHz ~ 100MHZ by every center frequency.In addition, the wide-band frequency tuning (the second modulation) was modulated by a digital code and a floating variable resister circuit.
原稿種別: 日本語
PDFファイルサイズ: 1,854 Kバイト
受取状況を読み込めませんでした
