商品情報にスキップ
1 1

直流漏れ電流測定による水トリー劣化位置標定

直流漏れ電流測定による水トリー劣化位置標定

通常価格 ¥770 JPY
通常価格 セール価格 ¥770 JPY
セール 売り切れ
税込

カテゴリ: 論文誌(論文単位)

グループ名: 【B】電力・エネルギー部門

発行日: 2016/04/01

タイトル(英語): Location of Water-tree Degradation in XLPE Cables by DC Leakage Current Measurement

著者名: 熊澤 孝夫(中部電力(株)エネルギー応用研究所),間宮 啓貴(矢崎エナジーシステム(株)電線開発センター)

著者名(英語): Takao Kumazawa (Energy Applications R&D Center, Chubu Electric Power Co., Inc.), Hirotaka Mamiya (Cable R&D Center, Yazaki Energy System Corporation)

キーワード: CVケーブル,水トリー,位置標定,直流漏れ電流,劣化診断  XLPE cable,water tree,location,dc leakage current,degradation diagnosis

要約(英語): In general, the degradation span of 6.6kV XLPE cable with plural connections is determined by DC leakage current measurement. This method needs to disconnect and reconnect the shielding layer and the outer semi-conducting layer at the cable connecting part, and hence it takes a lot of time and cost.We investigated a new method to locate the water tree degradation by DC leakage current. In 6.6kV XLPE cables the pulse-like leakage current called “kick” due to water tree degradation is often observed. Consequently, we detected the currents at the DC applying terminal and another terminal, and transformed them to the signals like a sine-wave having the phase difference exactly proportional to the time difference of arrival (TDOA) by using ceramic filters at 455kHz. The position of the water tree is calculated from TDOA obtained by the phase difference. In the experiments to locate the water tree using 6.6kV XLPE cable samples up to 85m long, the mean squared error was 2.2m. From the results, it is possible to locate the water tree in 6.6kV XLPE cable 2km long with an error of about 20m by optimizing the center frequency of the ceramic filter.

本誌: 電気学会論文誌B(電力・エネルギー部門誌) Vol.136 No.4 (2016)

本誌掲載ページ: 447-453 p

原稿種別: 論文/日本語

電子版へのリンク: https://www.jstage.jst.go.jp/article/ieejpes/136/4/136_447/_article/-char/ja/

販売タイプ
書籍サイズ
ページ数
詳細を表示する